The principle is to dip the cloth into the chemical material in the tank, squeeze it evenly with a roller, and then put it into the oven. When the cloth passes through the oven, it will be dried and shaped under the action of high temperature and hot air. The formed cloth has a good hand feel and stable dimensions.
Itu struktural karakteristik dari pencetakan dan pencelupan pengaturan mesin dan fungsi dari masing-masing unit% 3a pencetakan dan pencelupan pengaturan mesin is terutama disusun dari lima bagian% 3a the feeding bagian% 2c the pakan pemotong% 2c the utama tubuh dari oven dan the doffing and winding perangkat. In penambahan, ada adalah kimia bahan sistem dan minyak tungku pemanas sistem.
The structure of the feeding part is relatively simple. It consists of a trough and a roller. Chemicals are injected into the cloth, and excess chemical is squeezed out with a roller. Therefore, the chemical substances carried by the cloth are very uniform, which is a prerequisite for obtaining high-quality formed cloth. The thing to note here is that always pay attention to whether the pressure on the left and right sides of the roller is consistent, otherwise, the side with lower pressure will load more material, and the side with higher pressure will load more material. There will be less material loaded, and the cloth will have quality issues, such as inconsistencies left and right !
https://www.sunwinmachinery.com/
